Panasonic LUMIX DMC-LF1

Application (Record)
Taking pictures by setting the aperture value and
shutter speed [Manual Exposure] Mode
VQT5A33
- 94 -
■
Recording mode:
You can use this recording mode to set the desired shutter speed and aperture value
when you want to take pictures using the same exposure (same combination of shutter
speed and aperture value) or when you cannot obtain pictures at the desired brightness
even after compensating the exposure.
Set mode dial to
Turn the control ring to select the aperture value, and turn the
control dial to select the shutter speed
• If Manual Focus is set (→87), press twice to be able to adjust the aperture value
with the control dial.
• If the control ring settings have been changed (→118), press to be able to adjust
the aperture value with the control dial.
Aperture values that can be set
*
1
Shutter speeds that can be set (seconds)
*
2
F2.0 - F8.0 250 - 1/4000
*
1
You may not be able to select some values depending on zoom position.
*
2
You may not be able to select some values depending on the aperture value.
About the exposure meter
Set shutter speed
Set aperture value
• Proper exposure is not possible in the range indicated in red.
■
Recording motion pictures in
• Aperture and shutter speed are automatically set.