Wi-Fi/NFC
Operating the camera using a smartphone
VQT5A33
- 178 -
Start “Image App” on your smartphone
• After it has started, a screen is displayed from which you select a connection
destination.
While the [ ] is displayed on the connection screen of the
“Image App”, hold the smartphone close to the camera
• It may take some time to complete connecting.
• When the connection is complete, live images captured by the camera will be
displayed on your smartphone.
• If you connect during playback of one picture, it will be transferred to the
smartphone. (→181)
Hold the smartphone close to this area
(within 5 mm (0.20 inch))
Press to select [Yes], then press [MENU/SET]
Hold the smartphone close to this area of the unit again
• When the connection is complete, live images captured by the camera will be
displayed on your smartphone.
• Connected smartphones are registered to this unit. From the next time and on,
you can connect by performing steps and .
To Next Page
Loading...
