Others
Q&A Troubleshooting
VQT5A33
- 268 -
Try checking these items (→268 - 278) first.
If the problem persists, performing [Reset] in the [Setup] menu may resolve the issue
(→61). (Note that except for some items such as [Clock Set], all settings are returned to
their values at the time of purchase.)
Battery, power
The charging lamp turns off before the battery is fully charged.
●
Charging is being performed in a place with extremely high or low temperature.
→ Reconnect the USB connection cable (supplied) and retry charging in a place where ambient
temperature is 10 °C to 30 °C (50 °F to 86 °F) (temperature conditions also apply to the battery
itself).
(When the USB connection cable is reconnected after the battery is fully charged, the charging
lamp will light for approximately 15 seconds.)
Camera does not work even if the camera is turned on.
●
Battery is not inserted correctly (→14), or needs recharging.
Camera switches off as soon as the camera is turned on.
●
Battery needs recharging.
This unit is turned off automatically.
●
If you connect to a TV compatible with VIERA Link (HDMI) with an HDMI micro cable and turn off
the TV with the remote control for the TV, this unit also turns off.
→ If you are not using VIERA Link (HDMI), set [VIERA Link] to [OFF]. (→62)
To Next Page
Loading...
