Others
Q&A Troubleshooting
VQT5A33
- 275 -
About the Wi-Fi function (continued)
Transmission of the image fails midway.
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide] (→161).
→ Reduce the image size at [Size] (→238), and then send.
→ Image cannot be transmitted when the battery indicator is flashing red.
Motion picture cannot be transmitted.
●
File format of the motion picture that can be sent differs depending on the destination.
(→185, 192, 194, 199, 205, 210)
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide] (→161).
I cannot send images to an AV device.
●
Sending may fail depending on the operational status of the AV device.
Also, sending may take a while.
I cannot connect using the NFC function.
●
The smartphone is not NFC compatible.
This function can be used with NFC compatible devices with Android (2.3.3 or above).
●
Is the NFC function on the smartphone turned off?
●
The [NFC Operation] on this unit is set to [OFF]. (→240)
●
The camera has a hard time recognizing some smartphone models. If it is not recognized, slowly
shift the smartphone while it is beside the unit.
To Next Page
Loading...
