Basics
Recording motion pictures
VQT5A33
- 42 -
●
If the surrounding temperature is high, or a motion picture is recorded
continuously, is displayed and recording may be stopped halfway through
to protect the camera.
●
When using zoom while recording motion pictures, it may take some time to focus.
●
Depending on the environment when recording motion pictures, the screen may
turn black for an instant or noise may be recorded because of static electricity,
electromagnetic waves, etc.
●
The available recording time displayed on the screen may not decrease regularly.
●
If data is repeatedly recorded and deleted, the total available recording time on the
SD card may be reduced. To restore the original capacity, use the camera to format
the SD card. Be sure to save all important data to your computer or other media
before formatting, as all data saved to the card will be erased.
●
[Stabilizer] functions regardless of the settings before a motion picture is recorded.
●
The following functions are not available:
Extended optical zoom, flash, [Face Recog.], [Rotate Disp.] for pictures taken
vertically.
●
For certain memory cards, recording may end while in progress.
●
The recording range may become narrower in motion pictures compared to still
pictures. Also, if the aspect ratio is different for still pictures and motion pictures, the
angle of view will change when starting to record a motion picture. The recordable
area is displayed by setting [Video Rec Area] (→57) to [ON].
●
If Extended optical zoom is used before pressing the motion picture button, these
settings will be cleared, and the recordable area will be changed significantly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
