Application (Record)
Taking pictures with Auto Focus
VQT5A33
- 85 -
■
Changing the position and size of the AF area
When [AF Mode] is set to (1-area-focusing), you can move the position or size of the
AF area at the center.
Select [AF Mode] from the [Rec] menu
Use cursor button to select [ ] from the [AF Mode]
items and press [DISP.] button
To change the AF area
To move the AF area: Press
To change the size of the AF area: Turn the control dial
• To restore the AF area to its initial state (position and
size) → Press [DISP.] button
Press [MENU/SET]
AF Area
Reset
Size
●
Cannot be changed during motion picture recording.
●
When the AF area is small, it may be difficult to adjust the focus.
●
When [Metering Mode] is set to (spot-focusing), the new position of the AF area
will be measured.
To Next Page
Loading...
