EasyManuals Logo

Panasonic Lumix DMC-LX3 User Manual

Panasonic Lumix DMC-LX3
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #122 background imageLoading...
Page #122 background image
VQT1T27
122
Connecting to other equipment
Press 3/4 to select a mode.
What screen will be displayed here depends on the flash
mode setting of the external flash unit
Press [MENU/SET].
While the external flash is connected, the following icons are
displayed.
Number of pictures taken in burst mode when using external flash.
You can take up to 3 pictures by keeping the shutter button pressed down.
Depending on the extra flash you use or the recording conditions, you cannot take pictures in
this mode or the amount of light may become insufficient for the second or subsequent
pictures.
Note
When the flash mode of the dedicated flash is set to [TTL AUTO], various different flash
settings can be selected to suit the recording mode. For the flash settings that can be selected,
refer to P46.
When the flash mode of the dedicated flash is set to [TTL AUTO] or [AUTO], the flash output
can be adjusted by the camera. For details, refer to the operating instructions of the dedicated
flash.
You can set the aperture value, the shutter speed and the ISO sensitivity on the camera even
when attaching the external flash.
Some commercial external flashes have synchro terminals with high-voltage or reversed
polarity. Using such extra flashes may cause a malfunction or the camera may not operate
normally.
If you use commercially available external flashes with communication functions other than the
dedicated one, they may not operate normally or they may be damaged. Do not use them.
Even if the external flash is turned off, the camera may enter the external flash mode when the
external flash is attached. When you are not using the external flash, detach it or set it to
Forced OFF.
When attaching the external flash, the built-in flash cannot be activated.
Do not open the built-in flash when an external flash is attached.
The camera will become unstable when attaching the external flash, it is recommended to use
a tripod when taking picture.
Turn off the camera when removing the external flash.
Detach the external flash when carrying the camera.
When attaching the external flash, do not hold only the external flash because it may detach
from the camera.
If you use the external flash when the white balance is set to [ ] finely adjust the white
balance depending on the picture quality. (P80)
If you take pictures close to the subject in Wide, the vignetting effect may appear on the bottom
of the recorded picture.
Read the operating instructions of the external flash for details.
/ External flash active
/ External flash Forced OFF
[OFF] [˜] [ò]
Burst speed
(pictures/second)
2.5 Approx. 2
Number of recordable
pictures (pictures)
—max. 3
3
4
P.PC_DMC-LX3_eng.book 122 ペー 008年7月8日 火曜日 午後10時13分

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-LX3 and is the answer not in the manual?

Panasonic Lumix DMC-LX3 Specifications

General IconGeneral
Megapixel10.1 MP
Camera typeCompact camera
Sensor typeCCD
Image stabilizerYes
Total megapixels11.3 MP
Image sensor size- \
Supported aspect ratios3:2, 4:3, 16:9
Maximum image resolution3648 x 2736 pixels
Still image resolution(s)640 x 480, 1600 x 1200, 1920 x 1080, 2048 x 1360, 2048 x 1536, 2560 x 1920, 3072 x 2304, 3328 x 1872, 3968 x 2232
Digital zoom4 x
Optical zoom2.5 x
Combined zoom10 x
Extra/Smart zoom4.5 x
Focal length range5.1 - 12.8 mm
Number of aspheric elements4
Lens structure (elements/groups)8/6
Digital SLRNo
Aperture range (F-F)2 - 8
Camera shutter speed1/60 - 1/2000 s
Focal length (35mm film equivalent)24 - 60 mm
Normal focusing range0.5 - ∞ m
Auto focusing (AF) modesContinuous Auto Focus, Multi Point Auto Focus, Single Auto Focus, Spot Auto Focus
Macro focusing range (tele)0.3 - ∞ m
Macro focusing range (wide)0.01 - ∞ m
Light meteringCentre-weighted, Spot
ISO sensitivity80, 100, 200, 400, 1600, 3200, Auto
Light exposure modesAperture priority AE, Manual, Shutter priority AE
Light exposure controlProgram AE
Light exposure correction± 2EV (1/3EV step)
Flash modesAuto, Flash off, Flash on, Forced off, Forced on, Red-eye reduction, Slow synchronization
Flash range (tele)0.3 - 5.9 m
Flash range (wide)0.8 - 8.3 m
Scene modesBeach, Candlelight, Children, Fireworks, Night landscape, Portrait, Snow, Sports, Sunset
Image editingRotating, Trimming
Photo effectsSepia
White balanceAuto, Cloudy, Daylight, Shade
Shooting modesAperture priority, Auto, Movie, Shutter priority
Camera playbackMovie, Single image, Thumbnails
Self-timer delay2, 10 s
Camera file systemDPOF 1.1, Exif 2.2
On Screen Display (OSD) languagesDEU, ENG, ESP, FRE, ITA, JPN
Video resolutions320 x 240, 640 x 480 pixels
Motion JPEG frame rate30 fps
Maximum video resolution640 x 480 pixels
Analog signal format systemNTSC, PAL
Internal memory50 MB
Compatible memory cardsSD, SDHC
Field of view100 %
Display diagonal3 \
Display resolution (numeric)460000 pixels
USB version2.0
Product colorBlack
Battery voltage3.7 V
Battery capacity1150 mAh
Battery life (CIPA standard)380 shots
Cables includedAV, USB
Weight and Dimensions IconWeight and Dimensions
Depth27.1 mm
Width108.7 mm
Height59.5 mm
Weight265 g
Weight (including battery)290 g

Related product manuals