13
VQT1T27
Before Use
Attaching the Lens Cap/Strap
∫ Lens Cap
•
When you turn the camera off, carry the camera or play back the pictures, attach the lens cap
to protect the surface of the lens.
Pass the string through the hole on the lens
cap.
Pass the same string through the hole on the
camera.
Attach the lens cap.
• Detach the lens cap before turning on the camera
in the recording mode.
• Do not hang or swing around this unit with the lens
cap string attached.
• Be careful not to lose the lens cap.
∫ Strap
•
We recommend attaching the strap when using the camera to prevent it from dropping.
Pass the strap through the hole at the strap
eyelet.
P.PC_DMC-LX3_eng.book 13 ページ ２００８年７月８日 火曜日 午後１０時１３分
To Next Page
Loading...
