VQT1T27
14
Before Use
Pass the strap through the ring first, and
then pass through the stopper and
fasten the strap.
A Pull the strap 2 cm (0.07 feet) or more.
• Attach the strap to the other side of the camera
being careful not to twist it.
• Check that the strap is firmly attached to the
camera.
• Attach the strap so that the “LUMIX” LOGO is on the
outside.
P.PC_DMC-LX3_eng.book 14 ページ ２００８年７月８日 火曜日 午後１０時１３分
To Next Page
Loading...
