VQT1T27
82
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P21.
This allows the focusing method that suits the positions and number of the subjects to be
selected.
Applicable modes:
Note
•
The camera is focusing on all the AF areas when multiple AF areas (max. 5 areas) light at the
same time in [ ]. If you want to determine the focus position to take pictures, switch the AF
mode to [ƒ], [Ø] or [Ù].
• If the AF mode is set to [ ], the AF area is not displayed until the picture is brought into focus.
• Switch the AF mode to [ƒ] or [Ø] if it is difficult to focus using [Ù].
• The camera may detect the subjects other than a person as the face. In this case, switch the
AF mode to any modes other than [š] and then take a picture.
• The AF mode cannot be set in [FIREWORKS] in scene mode.
• It is not possible to set [š] in the following cases.
– In [NIGHT SCENERY], [FOOD], [STARRY SKY] and [AERIAL PHOTO] in scene mode.
– In motion picture mode.
∫ About [š]
The following AF area frames are displayed when the camera detects the
faces.
Yellow:
When the shutter button is pressed halfway, the frame turns green when
the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
•
Under certain picture-taking conditions including the following cases, the facial recognition
function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [ ].
– When the face is not facing the camera
– When the face is at an angle
– When the face is extremely bright or dark
– When there is little contrast on the faces
[AF MODE]
[š]: Face detection
The camera automatically detects the person’s face. The
focus and exposure can then be adjusted to fit that face no
matter what portion of the picture it is in. (max. 15 areas)
[]: AF Tracking
Focus and exposure can be adjusted to a specified subject.
Focus will keep on following the subject even if it moves.
(Dynamic tracking)
[]: Multi-area-focusing The camera focuses on up to 5 focus areas per AF area. This
is effective when the subject is not in the center of the screen.
[ƒ]: 1-area-focusing
(High speed)
The camera quickly focuses on the subject in the AF area on
the center of the screen.
[Ø]: 1-area-focusing The camera focuses on the subject in the AF area on the
center of the screen.
[Ù]: Spot-focusing The camera focuses on a limited narrow area in the screen.
M
P.PC_DMC-LX3_eng.book 82 ページ ２００８年７月８日 火曜日 午後１０時１３分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
