Panasonic PT-AE4000U - Maintenance and Troubleshooting; Indicator Lights and Problem Solving

PICTURE menu
E
NGLISH - 25
Adjusting the 3) OUTPUT level.
To adjust the OUTPUT level from the present
setting, press ▲ ▼ continuously until it reaches to
your desired level.
It can move up and down but cannot be set beyond
the adjacent points.
Ex. Press ▲ in the Y ADJUST menu and move
the selected point upward.
RESET
Y ADJUST
POINT INPUT
0% 50%
50% +10
5
100%
INPUT
OUTPUT
OUTPUT
MOVE
UP
RESET
Y ADJUST
POINT INPUT
0% 50%
50% +30
5
100%
INPUT
OUTPUT
OUTPUT
Changing the adjustment by different color types.4)
To switch to a different color ADJUST menu, press
the ENTER button continuously until it reaches your
desired color ADJUST menu.
Y ADJUST R ADJUST
B ADJUST G ADJUST
You can also switch each different color ADJUST
menu through the GAMMA ADJUSTMENT menu.
Select your required color ADJUST (Y ADJUST,
R ADJUST, G ADJUST, B ADJUST) with ▲ ▼ in
the GAMMA ADJUSTMENT menu and press the
ENTER button.
ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
Y ADJUST
R ADJUST
G ADJUST
B ADJUST
INITIALIZE
ADVANCED
5
GAMMA ADJUSTMENT
ENTER
RETURN
SELECT
RESET
R ADJUST
POINT INPUT
0% 50%
50% +10
5
100%
INPUT
OUTPUT
OUTPUT
Setting the 5) OUTPUT levels back to the default
setting.
To set the OUTPUT level on the selected point
back to the default setting “0”, press the DEFAULT
button on the remote control.
NOTE:
Individual • INPUT levels cannot be set back to their
default settings by pressing the DEFAULT button.
Please press ◄ ► to move back themselves if needed.
In the • Y ADJUST menu, if you press the DEFAULT
button, all Y/R/G/B output settings will go back to the
default setting “0”.
Adjustable range depends on the input signal. •