To Next PageTo Next PageWhy is the color pale or grayish on my Panasonic PT-RZ575 Projector?
If the color on your Panasonic Projector appears pale or grayish, check whether [COLOR] and [TINT] are adjusted correctly. Ensure that the external device connected to the projector is adjusted correctly. Also, inspect the computer cable for any damage.
What to do if Panasonic PT-RZ575 audio is not outputting?
If you're not getting any audio from your Panasonic Projector, first ensure the external device is correctly connected to the audio input terminal. Check if the mute function is enabled. Finally, verify that [AUDIO IN SELECT] in [AUDIO SETTING] is correctly set.
How to fix if part of the image is missing on Panasonic Projector?
If part of the image is missing on your Panasonic Projector, ensure that the lens position is within the adjustment range. Verify that [SHIFT] is adjusted correctly. Check if [ASPECT] is set properly. Finally, confirm that [BLANKING] is adjusted correctly.
What to do if Panasonic Projector buttons on the control panel do not operate?
If the buttons on the control panel of your Panasonic Projector do not operate, check if the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE].
Why cannot lens shift be adjusted on Panasonic PT-RZ575 Projector?
If the lens shift cannot be adjusted on your Panasonic Projector, perform [LENS CALIBRATION].
Why cannot control the Panasonic PT-RZ575 with Art-Net?
If you cannot control the Panasonic Projector with Art-Net, ensure that the connections between the twisted-pair-cable transmitter and an external device, and between the twisted-pair-cable transmitter and the projector are correctly done. Verify that [Art-Net SETUP] is set to other than [OFF]. Also, check that [NET], [SUB NET], [UNIVERSE], and [START ADDRESS] are set correctly.
General