Panasonic PT-VMZ50

Ceiling mount bracket safeguards
f When installing the projector to a ceiling, be sure to use the specied optional Ceiling Mount Bracket.
Model No.: ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKV400B (Projector mount
bracket)
f When installing the projector, attach the drop-prevention kit included with the Ceiling Mount Bracket.
f Ask a qualied technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket
not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty
period of the projector has not expired.
f Unused products must be removed promptly by a qualied technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specied tightening torques. Do not use
electric screwdrivers or impact screwdrivers.
(Screw tightening torque: 1.25 ± 0.2 N·m)
f Read the Installation Instructions for the Ceiling Mount Bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Screw hole specications for ceiling mount (Bottom view)
Unit : mm (inch)

M4 × 0.7
8 mm (5/16")
r Screw hole dimensions for ceiling mount (Bottom view)
Unit : mm (inch)
369 (14-17/32")
286 (11-1/4")
186 (7-5/16")
134 (5-9/32")
3 (1/8")
226 (8-29/32")
156 (6-5/32")
120 (4-23/32")
117 (4-19/32")
299 (11-25/32")
148 - ENGLISH
Chapter 7 Appendix - Ceiling mount bracket safeguards