Panasonic PT-VMZ50

f The [DIGITAL ZOOM] individual adjustment screen is displayed when executing the menu operation. For
details, refer to [DISPLAY OPTION] menu → [OTHER FUNCTIONS] → [DIGITAL ZOOM]. (x page 82)
2) Press the following buttons to move the location of the image or adjust the magnification.
f The digital zoom function is canceled if the <D.ZOOM -> button/<D.ZOOM +> is pressed for three seconds
or more.
Operation menu/Buttons Operation Adjustment
Moving screen
Remote control operation button
Press the a button.
Moves the image to the bottom.
Press the s button.
Moves the image to the top.
Press the q button.
Moves the image to the right.
Press the w button.
Moves the image to the left.
Press the <MENU> button. Moves the image to the upper left.
Press the <RETURN> button. Moves the image to the upper right.
Press the <ENTER> button. Moves the image to the center.
Press the <DEFAULT> button. Moves the image to the lower left.
Press the <FUNCTION> button. Moves the image to the lower right.
Press the <D.ZOOM +> button. Increases magnication.
Press the <D.ZOOM -> button. Decreases magnication.
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
a button
w button
▼ button
q button
<MENU> button <RETURN> button
<FUNCTION> button
<DEFAULT> button
<ENTER> button
Fig. 1 Screen display position after the button operation
Note
f The magnication is not displayed in the moving screen.
f The digital zoom function is canceled if the input signal changes during a digital zoom.
f During a digital zoom, the freeze function is disabled.
f The digital zoom function may not work properly for some still image-based signals.
Switching the image aspect ratio
Switch the image aspect ratio according to the input.
button
1) Press the <ASPECT> button.
f The setting will change each time you press the button.
Note
f Refer to the [POSITION] menu → [ASPECT] (x page 73) for details.
Using the presentation timer function
The presentation timer can be operated.
The presentation can be performed while conrming the elapsed time or remaining time against the specied
time.
button
1) Press the <P-TIMER> button.
f The count is started.
2) Press the <P-TIMER> button again.
f The count is stopped.
ENGLISH - 55
Chapter 3 Basic Operations - Operating with the remote control