About your projector
Remote control
Attention
Do not drop the remote control. f
Avoid contact with liquids. f
Do not attempt to modify or disassemble the remote control. f
<1 v/b> Button
Turn the projector on or off. (
Æ
pages 36,37)
Input Selection Buttons: <COMPUTER 1>, 2
<COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>.
These buttons are used to select the input signal.
(
Æ
page 40)
asqw3 Buttons, <ENTER> Button
Navigate the MENU display.
<DEFAULT> Button4
Resets the content of the sub-menu to the factory default.
(
Æ
page 46)
<MENU> Button5
Open or close the On-Screen Menu. (
Æ
page 45)
<ID SET> Button6
Sets the ID number of the remote control to use for a
system using multiple projectors.
<FREEZE> Button7
Pauses the projected image and mute the audio
temporarily. (
Æ
page 40)
<D.ZOOM +/–> Buttons8
Zoom in and out the images. (
Æ
page 41)
<VOL +/–> Buttons 9
Adjust the volume of the speaker. (
Æ
page 42)
<KEYSTONE> Button10
Correct keystone distortion. (
Æ
page 39)
<P IN P> Button (11 Only for PT-VW340Z)
Operate the P IN P function.
<AV MUTE> Button12
Used to turn off the audio and video temporarily.
(
Æ
page 41)
<P-TIMER> Button13
Operate the P-timer function. (
Æ
page 41)
<MUTE> Button14
Used to mute the audio. (
Æ
page 42)
<ID ALL> Button15
Used to simultaneously control all the projectors with
one remote control for a system using multiple projectors.
<RETURN> Button16
Return to the previous menu or cancel the setting.
<FUNCTION> Button17
Assigns a frequently used operation as a shortcut button.
<AUTO SETUP> Button18
Automatically adjusts the image display position while
projecting the image. (
Æ
page 39)
Remote control signal emitter19
1
2
3
5
7
8
9
4
6
10
11
12
13
14
15
16
17
18
19
20 - ENGLISH
Chapter 1 Preparation - About your projector
To Next Page
Loading...
