Control panel and Indicators r
r Rear terminals
Attention
When a LAN cable is directly connected to the projector, the network connection must be made indoors. f
<COMPUTER 1 IN> terminal1
This is the terminal to input RGB or YP
B
P
R
/YC
B
C
R
signals.
<COMPUTER 2 IN/2 1 OUT> terminal
This is the terminal to input RGB signals or output
the RGB/YC
B
C
R
/YP
B
P
R
signals to external monitor.
<HDMI IN> terminal3
This is the terminal to input HDMI signals.
<LAN> terminal4
This is the LAN terminal to connect to the network.
<SERIAL IN> terminal5
This is the RS-232C compatible terminal to
externally control the projector by connecting a
computer.
<VIDEO IN> terminal6
This is the terminal to input video signals.
<AUDIO IN 3 (L/R)> terminal7
This is the terminal to input audio signals.
There are a left (L) terminal and a right (R)
terminal.
<AUDIO IN 1> terminal8
This is the terminal to input audio signals.
<AUDIO IN 2 (MIC IN)> terminal9
This is the terminal to input audio signals. Or
connect the MIC to this terminal.
<VARIABLE AUDIO OUT> terminal 10
This is the terminal to output audio signals input to
the projector.
<S-VIDEO IN> terminal11
This is the terminal to input s-video signals.
Security slot12
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
<1 v/b> button
Turns the projector on/off.
<ON(G)/STANDBY(R)> indicator2
Displays the status of the power.
<LAMP> indicator3
Lights red when the projection lamp reaches its
end of life.
<WARNING> indicator4
Indicates the abnormal conditions of the projector.
Ambient Luminance sensor5
Detects room's light and select proper image
quality.
<MENU> button6
Displays the menu screen. (
Æ
page 45)
<ENTER> button7
Executes the selected item.
asqw8 buttons
Navigate the MENU screen.
Adjust the volume level (qw).
<INPUT SELEC9 T> button
Select the input signal for projection. (
Æ
page 38)
<AUTO SETUP> button10
Executes the auto setup function.
1
2
3 4
5
6 7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
22 - ENGLISH
Chapter 1 Preparation - About your projector
To Next Page
Loading...
