Panasonic PT-VW340Z

Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and video temporarily.
button
Press the 1) <AV MUTE> button on the remote control.
The audio and video turn off. f
Press the <AV MUTE> button again.2)
The audio and video turn on. f
Note
When [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE. f
Using the P-TIMER function
You can operate the P-TIMER function.
When you press the <P-TIMER> button on the remote control, the projector displays either a remaining time or a elapsed time.
button
Press the <P-TIMER> button on the remote control.1)
The count time starts. f
Remaining time or elapsed time is displayed in the lower right corner of the projected image. f
Press the <P-TIMER> button again.2)
The count time stops. f
Press the <P-TIMER> button again.3)
You can restart the count. f
Note
Pressing the button for at least 3 seconds to release the P-TIMER function. f
For details, please refer to the [DISPLAY OPTION] menu → [P-TIMER] ( f Æpage 64).
Using the DIGITAL ZOOM function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
buttons
Press the <D.ZOOM +> or <D.ZOOM -> button on the remote control.1)
The moving screen is displayed. f
The [DIGITAL ZOOM] individual adjustment screen is displayed when executing the menu operation. For details, refer f
to [DISPLAY OPTION] → [OTHER FUNCTIONS] (Æpage 65).
Pressing the <RETURN> button cancels the function. f
Button functions during [DIGITAL ZOOM] r
Operation menu Operation Adjustment
Adjustment
range
Press the <D.ZOOM +> button or w button.
Increases magnication.
1.0 ~ 3.0
Press the <D.ZOOM -> button or q button.
Decreases magnication.
ENGLISH - 41
Chapter 3 Basic Operations - Basic operations by using the remote control