EasyManua.ls Logo

Panasonic PT-VW340Z

Panasonic PT-VW340Z
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Press 3) as to select [WARNING MESSAGE].
Press 4) qw to switch the item.
The items will switch each time you press the button. f
[ON] Displays the warning/error message.
[OFF] Hides the warning/error message.
[HDMI SIGNAL LEVEL]
Switch the setting when the external equipment is connected to the <HDMI IN> terminal of the projector and the image is not
projected correctly.
Press 1) as to select [HDMI SIGNAL LEVEL].
Press the <ENTER> button.2)
The [HDMI SIGNAL LEVEL] screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[AUTO] Sets the signal level automatically.
[64-940]
Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the <HDMI IN>
terminal.
[0-1023]
Select when the DVI terminal output of an external device (such as a computer) is connected to the <HDMI
IN> terminal via a conversion cable or similar cable.
Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI IN>
terminal.
Note
The optimal setting varies depending on the output setting of the connected external device. Refer to the operation f
instruction of the external device regarding the output of the external device.
The HDMI signal level is displayed for every 30 bits of input. f
[CLOSED CAPTION SETTING]
(Only for NTSC, 480i YC
B
C
R
input)
Set the closed caption.
Selecting the closed caption display
Set the closed caption display.
Press 1) as to select [CLOSED CAPTION SETTING].
Press the <ENTER> button.2)
The [CLOSED CAPTION SETTING] screen is displayed. f
Press 3) as to select [CLOSED CAPTION].
Press 4) qw to switch the item.
The items will switch each time you press the button. f
[ON] Closed captions are displayed.
[OFF] Closed captions are not displayed.
When [ON] is selected, proceed to Step 5). f
When the confirmation is displayed, select [OK], and press the <ENTER> button.5)
Setting the closed caption mode
Press 1) as to select [CLOSED CAPTION SETTING].
Press the <ENTER> button.2)
The [CLOSED CAPTION SETTING] screen is displayed. f
ENGLISH - 61
Chapter 4 Settings - [DISPLAY OPTION] menu

Table of Contents

Other manuals for Panasonic PT-VW340Z

Related product manuals