Panasonic PT-VW340Z

[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (Æpage 45) for the operation of the menu screen.
After selecting the item, press f asqw to set.
[REALTIME KEYSTONE]
The projector can correct the vertical trapezoidal distortion automatically when the projector is installed tilted.
Press 1) as to select [REALTIME KEYSTONE].
Press 2) qw or the <ENTER> button.
[REALTIME KEYSTONE] individual adjustment screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button f .
[OFF] Set this function to off.
[ON] Executes vertical keystone correction automatically when the projector is installed tilted.
[KEYSTONE]
You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.
Press 1) as to select [KEYSTONE].
Press the <ENTER> button.2)
The [KEYSTONE] screen is displayed. f
Press 3) as to select one item to adjust.
[KEYSTONE] Adjusts when the trapezoid of the projected image is distorted.
[CORNER CORRECTION] Adjusts when the four corners of the projected image is distorted.
[KEYSTONE]
Press 1) as to select [KEYSTONE].
Press the <ENTER> button.2)
The [KEYSTONE] screen is displayed. f
Press 3) as to select [KEYSTONE].
Press the <ENTER> button.4)
The [KEYSTONE] individual adjustment screen is displayed. f
Press 5) asqw to adjust the item.
54 - ENGLISH
Chapter 4 Settings - [POSITION] menu