Panasonic PT-VW340Z

Using the P IN P function
(Only for PT-VW340Z)
Two images can be projected simultaneously in form of projection mode (a small sub screen in the main screen
[P IN P]/a small sub screen side by side with the main screen [SIDE BY SIDE]).
button
Press the 1) <P IN P> button on the remote control.
Press this button to switch the mode ([P IN P]/[SIDE BY SIDE]). f
Note
For details, refer to [P IN P] ( f Æ page 65).
Switch the input source
You can switch the input source of the main screen and sub screen while the P IN P function is operating.
Switch the input source of the main screen r
Switch the input source as the same operation as the single screen.
Switch the input source of the sub screen r
When two screens are displayed (when no menu is displayed), press the <ENTER> button, the red frame of the
sub screen will be displayed. Switch the input source as the same operation as the single screen.
Press the <ENTER> button again, the red frame of the sub screen will disappear and then return to switch the
input source of the main screen.
INPUT A
INPUT A
INPUT B
INPUT A
INPUT B
Main screen
Sub screen
Main screen
Sub screen
ENGLISH - 43
Chapter 3 Basic Operations - Basic operations by using the remote control