Panasonic PT-VX42Z

About your projector
Remote control
Attention
Do not drop the remote control. f
Avoid contact with liquids. f
Do not attempt to modify or disassemble the remote control. f
<1 v/b> Button
Turn the projector on or off. (
Æ
pages 37, 38)
Input Selection Buttons: <COMPUTER 1>, 2
<COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>.
These buttons are used to select the input signal.
(
Æ
page 41)
asqw3 Buttons, <ENTER> Button
Navigate the MENU display.
<DEFAULT> Button4
Resets the content of the sub-menu to the factory default.
(
Æ
page 46)
<MENU> Button5
Open or close the On-Screen Menu. (
Æ
page 45)
<ID SET> Button6
Sets the ID number of the remote control to use for a
system using multiple projectors.
<FREEZE> Button7
Pauses the projected image and mute the audio
temporarily. (
Æ
page 41)
<D.ZOOM +/–> Buttons8
Zoom in and out the images. (
Æ
page 42)
<VOL +/–> Buttons 9
Adjust the volume of the speaker. (
Æ
page 43)
<KEYSTONE> Button10
Correct keystone distortion. (
Æ
page 40)
<AV MUTE> Button11
Used to turn off the audio and video temporarily.
(
Æ
page 42)
<P-TIMER> Button12
Operate the P-timer function. (
Æ
page 42)
<MUTE> Button13
Used to mute the audio. (
Æ
page 43)
<ID ALL> Button14
Used to simultaneously control all the projectors with
one remote control for a system using multiple projectors.
<RETURN> Button15
Return to the previous menu or cancel the setting.
<FUNCTION> Button16
Assigns a frequently used operation as a shortcut button.
<AUTO SETUP> Button17
Automatically adjusts the image display position while
projecting the image. (
Æ
page 40)
Remote control signal emitter18
1
2
3
5
7
8
9
4
6
10
11
12
13
14
15
16
17
18
ENGLISH - 21
Chapter 1 Preparation - About your projector