Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
Press the <MENU> button on the remote control or the control panel.1)
The main menu screen appears. f
Press 2) as to select an item from the main menu.
The selected item is highlighted in yellow. f
Press the <ENTER> button.3)
The submenu appears so that you can select the sub-menu item. f
Press 4) as to select the desired sub-menu item, press qw or the <ENTER> button to set or adjust
settings.
Some items will switch in order as follows each time you press f qw.
For some items, press f qw to display an individual adjustment screen with a bar scale as shown below.
ENGLISH - 45
Chapter 4 Settings - Menu Navigation
To Next Page
Loading...
