[ASPECT]
You can switch the aspect ratio of the image.
Press 1) as to select [ASPECT].
Press 2) qw or the <ENTER> button.
The [ASPECT] individual adjustment screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[NORMAL] Displays images without changing the aspect ratio of the input signals.
[AUTO]
*
1
The aspect ratio is automatically switched to the optimum aspect ratio when an aspect ratio identier is
included in the input signal.
[WIDE]
Displays images with the aspect ratio converted to 16:9 when standard signals
*
2
are input.
Display images without changing the aspect ratio when wide-screen signals
*
3
are input.
[H FIT]
While the aspect ratio is kept xed, The image is projected using all the panel pixels horizontally, and the
vertical edges of the image are cropped.
[V FIT]
Displays the height of the panel pixels vertically without changing the aspect ratio when wide-screen signals
are input. When signals have the aspect ratio horizontally longer than the aspect ratio of the screen, the
images are displayed with the right and left parts cut off.
[FULL]
The image is projected using all the panel (screen) pixels. The input signals are converting to the aspect ratio
of the panel (screen).
[NATIVE] Displays images without changing the resolution of the input signals.
Only for Video (NTSC) and 480i (YC*1
B
C
R
) signals input.
Standard signals are input signals with an aspect ratio of 4:3 or 5:4.*2
Wide-screen signals are input signals with an aspect ratio of 16:10, 16:9 or 15:9.*3
Note
The image size may be switched abnormally when [AUTO] is selected, please set to [NORMAL] or [WIDE] according to the f
input signal.
Some size modes are not available for certain types of input signals. f
If an aspect ratio which is different from the aspect ratio for the input signals is selected, the images will appear differently f
from the originals. Be careful of this when selecting the aspect ratio.
If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public f
presentation, note that adjusting the aspect ratio or using the zoom function to change the screen images may be an
infringement of the rights of the original copyright owner for that program under copyright protection laws. Take care when
using a function of the projector such as the aspect ratio adjustment and zoom function.
If conventional (normal) 4:3 images which are not wide-screen images are displayed on a wide screen, the edges of the f
images may not be visible or they may become distorted. Such images should be viewed as with an aspect ratio of 4:3 in the
original format intended by the creator of the images.
ENGLISH - 57
Chapter 4 Settings - [POSITION] menu
To Next Page
Loading...
