The items will switch each time you press the button. f
[SXGA] The image will be displayed completely when it is set to [SXGA].
[SXGA +] The image will be displayed incompletely when it is set to [SXGA +].
[P-TIMER]
Set and operate the presentation timer function.
Press 1) as to select [P-TIMER].
Press the <ENTER> button.2)
The [P-TIMER] screen is displayed. f
[MODE] Switches the elapsed time between [COUNT UP] and [COUNT DOWN].
[TIMER] Sets the nish time of timer when [COUNT DOWN] is selected.
[START] / [STOP] /
[RESTART]
Operates the timer.
[RESET] Resets the count.
[EXIT] [P-TIMER] is nished.
Setting [MODE]
Press 1) as to select [MODE].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[COUNT UP] Displays the elapsed time from count started.
[COUNT DOWN] Displays the remaining time for the time in set in [TIMER] menu.
Setting the countdown timer
Press 1) as to select [TIMER].
Press 2) qw to set the timer.
The timer can be set from 1 to 180 minutes in 1 increment. f
The factory default setting is 10 minutes. f
Note
[TIMER] is available only when [MODE] is set to [COUNT DOWN]. f
The operation of [P-TIMER]
Press 1) as to select [START], [STOP] or [RESTART].
[START] Starts counting.
[STOP] Stops counting.
[RESTART] Restarts counting.
Press the <ENTER> button.2)
When you select [START] or [RESTART], the remaining time or the elapsed time will be displayed in the lower right of f
the projected image.
When you select [STOP], the remaining time or the elapsed time while stopping the counting will be displayed in the f
lower right of the projected image.
When [RESTART] is selected, then go to step 3). f
Press the <MENU> button 3 times and then the menu screen will disappear.3)
The start time will be displayed in the lower right of the projected image. f
Note
Y
ou can also use the P-TIMER function by pressing the <P-TIMER> button on the remote control (
fÆ
page 42).
If the elapsed time or remaining time is displaying, the text will not be displayed even when the [SECURITY] menu → [TEXT f
DISPLAY] (
Æ
page 74) is set to [ON].
The elapsed time or remaining time will not be display when the Menu screen is displaying. f
The start time will be "000:00" when [MODE] is set to [COUNT UP]. f
64 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
To Next Page
Loading...
