[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (
Æpage 45) for the operation of the menu screen.
After selecting the item, press f asqw to set.
[ON-SCREEN DISPLAY]
Set the on-screen display and position.
[INPUT GUIDE]
Set whether to display the input guide when switching the input source.
Press 1) as to select [ON-SCREEN DISPLAY].
Press the <ENTER> button.2)
The [ON-SCREEN DISPLAY] screen is displayed. f
Press 3) as to select [INPUT GUIDE].
Press 4) qw to switch the item.
The items will switch each time you press the button. f
[DETAILED] Displays the name of input terminal and input signal graphically.
[OFF] Disables the input guide.
[SIMPLE] Displays the name of input terminal and input signal.
[OSD POSITION]
Set the position of the menu screen (OSD).
Press 1) as to select [ON-SCREEN DISPLAY].
Press the <ENTER> button.2)
The [ON-SCREEN DISPLAY] screen is displayed. f
Press 3) as to select [OSD POSITION].
Press 4) qw to switch the item.
The items will switch each time you press the button as following: f
[CENTER] → [UPPER LEFT] → [UPPER RIGHT] → [LOWER LEFT] → [LOWER RIGHT] → [CENTER] → ...
[WARNING MESSAGE]
Set the display/hide of the warning message.
Press 1) as to select [ON-SCREEN DISPLAY].
Press the <ENTER> button.2)
The [ON-SCREEN DISPLAY] screen is displayed. f
60 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
To Next Page
Loading...
