Press 4) qw to switch the item.
The items will switch each time you press the button. f
[CC1] Displays CC1 data.
[CC2] Displays CC2 data.
[CC3] Displays CC3 data.
[CC4] Displays CC4 data.
Note
Closed captions are a function that is mainly used in North America to display text information with video signals. Captions f
may not be displayed depending on the connected devices or software being played back.
[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC f
B
C
R
signal is input.
If [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices f
or the used content of the closed caption corresponding connection.
If a closed caption signal of the selected mode is input, the text is not displayed even when the [SECURITY] menu → [TEXT f
DISPLAY] (
Æ
page 74) is set to [ON].
Closed captions are not displayed when the menu screen is displayed. f
[STARTUP LOGO]
Set the logo display when the power is turned on.
Press 1) as to select [STARTUP LOGO].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
[OFF] Disables the startup logo display.
Note
The startup logo will disappear in approximately f 30 seconds.
To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. f
If you do not register the [USER LOGO] image, the startup logo will not be displayed even if the [STARTUP LOGO] is set to f
[USER LOGO].
62 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
To Next Page
Loading...
