EasyManua.ls Logo

Panasonic PT-VX42Z

Panasonic PT-VX42Z
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note
The entered password is displayed with " f " mark on the screen.
An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password. f
If numbers have been used for the security password, the security password will need to be initialized again if the remote f
control is lost. Consult your dealer for the initialization method.
[TEXT DISPLAY]
Overlap the security message (text or image) over the projecting image.
Press 1) as to select [TEXT DISPLAY].
Press 2) qw to switch the items.
The items will switch each time you press the button. f
[OFF] Disables the text display.
[ON] Enables the text display.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [ON] in [TEXT DISPLAY].
Press 1) as to select [TEXT CHANGE].
Press the <ENTER> button.2)
The [TEXT CHANGE] screen is displayed. f
Press 3) asqw to select the text, and press the <ENTER> button to enter the text.
Press 4) asqw to select [OK], and press the <ENTER> button.
The text is changed. f
[MENU LOCK]
Display the menu with the <MENU> button, and set whether to enable menu operations.
Press 1) as to select [MENU LOCK].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[OFF] Disables the lock of the menu operation.
[ON] Locks the menu operation.
Note
After setting [MENU LOCK] to [ON], the <MENU> button cannot be operated if the incorrect password is input. f
[MENU LOCK] is set to [OFF] at the time of purchase or when [INITIALIZE ALL] has been executed. f
The lock release is maintained until the projector enters standby. f
[MENU LOCK PASSWORD]
Change the menu lock password.
Press 1) as to select [MENU LOCK PASSWORD].
Press the <ENTER> button.2)
The [MENU LOCK PASSWORD] screen is displayed. f
Press 3) asqw to select the text, and press the <ENTER> button to enter the text.
Up to 16 characters can be input. f
Press 4) asqw to select [OK], and press the <ENTER> button.
To cancel, select [CANCEL]. f
Attention
The initial password is “AAAA” at the time of purchase or when [INITIALIZE ALL] has been executed. f
Change the password periodically that is hard to guess. f
74 - ENGLISH
Chapter 4 Settings - [SECURITY] menu

Table of Contents

Other manuals for Panasonic PT-VX42Z

Related product manuals