Need help?Do you have a question about the Panasonic RS-232C and is the answer not in the manual?
Details RS-232 communication settings including signal level, sync method, data speed, and parity.
Explains the projector's address level and its limitation regarding multiple machine control.
Describes the physical RS-232 connector and its pin assignments for connectivity.
Specifies the requirements for the RS-232C 9-pin to 9-pin straight cable.
Explains the structure of commands sent to the projector, including STX, command, parameters, and ETX.
Details how the projector responds to commands, including normal responses and error messages.
Explains the standard notation used in command explanation tables for clarity.
Details the command to decrease the audio volume by one notch.
Details the command to increase the audio volume by one notch.
Details the command to set the audio volume to a specific level.
Details the command to enable or disable the projector's physical control panel buttons.
Details the command to decrease the digital zoom level.
Details the command to increase the digital zoom level.
Details the command to select the video input source.
Details the command to adjust the keystone correction.
Details the command to enable or disable automatic keystone adjustment.
Details the command to enable or disable automatic RGB input adjustment.
Details the command to perform an automatic setup of the projector.
Details the command to enable or disable automatic YPbPr adjustment.
Details the command to set the background color.
Details the command for the cursor down function for menu navigation.
Details the command for the cursor left function for menu navigation.
Details the command for the cursor right function for menu navigation.
Details the command for the cursor up function for menu navigation.
Details the command for the enter function for menu navigation.
Details the command to assign functions to the F1 key.
Details the command to enable or disable the freeze function.
Details the command to set the gamma, intended for service technicians.
Details the command to turn the On-Screen Display for input changes on/off.
Details the command to set the projector's installation orientation.
Details the command to toggle the Index Window function on/off.
Details the command to adjust the keystone correction value.
Details the command to select the language for on-screen menus.
Details the command to select the lamp power mode (Low/Standard).
Details the command to bring up the projector's menu.
Details the command to select the signal format for RGB input.
Details the command to enable or disable the resizing function.
Details the command to turn the shutter on/off, muting image and audio.
Details the command to reset all adjustments to factory defaults.
Details the command to turn off the projector's power supply.
Details the command to turn on the projector.
Details the command to query the state of the auto keystone feature.
Details the command to query the state of the auto RGB input feature.
Details the command to query the state of the auto set-up feature.
Details the command to query the current audio volume level.
Details the command to query the state of the auto YPbPr feature.
Details the command to query the current background color setting.
Details the command to query the clock phase level.
Details the command to query the dot clock level.
Details the command to query the state of the input display setting.
Details the command to query the state of the function key.
Details the command to query the current horizontal frequency.
Details the command to query the current vertical frequency.
Details the command to query the state of the freeze function.
Details the command to query the horizontal position level.
Details the command to query the currently selected input signal.
Details the command to query the status of the index window function.
Details the command to query the keystone adjustment level.
Details the command to query the current menu language.
Details the command to query the status of the lamp power.
Details the command to query the current picture mode.
Details the command to query the current power status.
Details the command to query the state of the RGB input format.
Details the command to query the state of the resizing feature.
Details the command to query the current signal mode setting.
Details the command to query the state of the shutter.
Details the command to query the projector's installation orientation.
Details the command to query the brightness level.
Details the command to query the color level.
Details the command to query the vertical position level.
Details the command to query the contrast level.
Details the command to query the sharpness level.
Details the command to query the tint level.
Details the command to query the video size level.
Details the command to query the white balance blue level.
Details the command to query the white balance green level.
Details the command to query the white balance red level.
Details the command to query the total lamp on time in hours.
Details the command to query the current lamp condition.
Details the command to adjust the brightness level.
Details the command to adjust the contrast level.
Details the command to adjust the color level.
Details the command to adjust the clock phase.
Details the command to adjust the dot clock.
Details the command to shift the picture horizontally.
Details the command to set the picture mode (Natural/Dynamic).
Details the command to set the signal mode (e.g., NTSC, PAL, AUTO).
Details the command to adjust the sharpness level.
Details the command to adjust the video size.
Details the command to set the aspect ratio of the projector.
Details the command to adjust the tint of the picture.
Details the command to shift the picture vertically.
Details the command to adjust the blue white balance level.
Details the command to adjust the green white balance level.
Details the command to adjust the red white balance level.
To Next Page
General