Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
1717
5.4 Audio Volume Set (AVL)
Name Audio Volume Set
Syntax [STX]AVL:p1p2p3[ETX]
Function This command set the Audio Volume to a set level.
Parameters 000 – 063 Volume Adjustment Range
Response [STX]AVL[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]AVL:047[ETX]
Notes The adjustment range value 000 would be no volume
and 063 would be maximum volume.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)