Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
3636
5.23 Input Display (OID)
Name Input Display
Syntax [STX]OID:p1[ETX]
Function This command will turn On or Off the On-Screen-
Display when the inputs are changed.
Parameters Code Description
0 Display Off
1 Display On
Response [STX]OID:0[ETX] turns off the OSD
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]OID[ETX]
Notes This command will only disable the Input Selection from
displaying on the screen. Warnings, Freeze and others
will still be shown.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)