Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
4141
5.28 Lamp Power (OLP)
Name Lamp Power
Syntax [STX]OLP:p1[ETX]
Function Selects the Lamp Power Mode.
Parameters Code Description
0 Low
1 Standard
Response [STX]OLP[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]OLP[ETX]
Notes In Low Mode the Brightness will decrease and the Fan
Speed will decrease. In the Low Mode the life of the
Lamp will increase.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)