Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
3535
5.22 Gamma Set (OGS)
Name Gamma Set
Syntax [STX]OGS:p1[ETX]
Function This command is to set the Gamma
Parameters Code Description
0 Default Data Read
1 EEPROM Data Read
Response [STX]OGS[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]OGS[ETX]
Notes This command is used for the service and adjustment
of the unit and should only be done by a qualified
trained technician.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)