Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
9494
5.81 Signal Mode Set (VSG)
Name Signal Mode Set
Syntax [STX]VSG:p1p2p3[ETX]
Function This command will set the signal mode.
Parameters
Code Description
AT1 - Auto 1 (Video/S-Video)
AT2 - Auto 2 (Video/S-Video)
NTS - NTSC (Video/S-Video)
N44 - NTSC 443 (Video/S-Video)
PAL - PAL (Video/S-Video)
PAN - N-PAL (Video/S-Video)
PAM - M-PAL (Video/S-Video)
SEC - SECAM (Video/S-Video)
AUT - AUTO (RGB)
U01 - User 1 (RGB)
U02 - User 2 (RGB)
U03 - User 3 (RGB)
Response [STX]VSG[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]VSG:NTS[ETX] Will set the Video NTSC Format.
Notes In Auto Mode the Projector will auto detect the input.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)