Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
3939
5.26 Keystone (OKS)
Name Keystone Adjustment
Syntax [STX]OKS:p1p2p3[ETX]
Function Adjusts the Keystone.
Parameters -32 to 31 0 is center default
p1p2p3 will reflect a value between -31 to 31
Positive numbers will have a Space in the p1 data.
Response [STX]OKS[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]OKS:-05[ETX]
Notes If the parameter is in the negative direction the bottom
becomes narrow. If in a positive the top of the picture
become narrow. Normal is 0.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)