Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
100100
5.87 White Balance Blue (VWB)
Name White Balance Blue
Syntax [STX]VWB:p1p2p3[ETX]
Function This command will adjust the Blue level to achieve
White Balance.
Parameters 000 – 063 White Balance Adjustment Range
Response [STX]VWB[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]VWB:031[ETX]
Notes This adjustment is for RGB only. Adjust the Blue signal
up or down, so that the white portions of the screen
appear white.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)