Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
2626
5.13 Auto YPbPr (OAY)
Name Automatic YPbPr
Syntax [STX]OAY:p1[ETX]
Function Sets the Auto YPbPr Mode for the Auto Set-up feature.
Parameters Code Description
0 Auto YPbPr Off
1 Auto YPbPr On
Response [STX]OAY[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]OAY[ETX]
Notes This command will Enable or Disable the Automatic
YPbPr Adjustment when the Auto Set-up (OAS) is
done.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)