Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
1414
5 Command Explanation
The following tables are the layout for the individual command explanations.
5.1 Details of Notation in Command Tables
Name This indicates the name of the command.
Syntax This indicates the syntax of the command.
Parameters are also notated when they are necessary. The
starting symbols in the command are [STX], and the
concluding symbols in the command are [ETX], the symbols
[ and ] are used for ease of explanation and are not to be
sent to the player.
Function This explains the function of the command.
Parameters This explains the parameters if parameters are required by
the syntax of the command.
Response This is the response character string from the AV device or
from the interface. In query commands, etc., this explains
the meaning of the response.
Interrupt Processing This indicates other commands that can be issued while the
AV equipment is processing the command.
Examples of Use This presents an example of actual notation
Notes Other information that is helpful concerning this command.
Projector Model to Command Compatibility
Model
Number
PT-L711U PT-L701U PT-L701SDU PT-L501U PT-L511U
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)