Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
4747
5.34 Power Off (POF)
Name Power Off
Syntax [STX]POF[ETX]
Function It turns off the power supply of the Projector.
Parameters None
Response After the power supply is turned off [STX]POF[ETX] is
returned. If the power supply is already off, the
projector will just return [STX]POF[ETX].
Interrupt Processing
Examples of Use [STX]POF[ETX]
Notes When this command is sent the Fan will continue to
operate until the Lamp has cooled down. Then the unit
will go into the Standby Mode.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)