Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
1818
5.5 Control Panel (CPK)
Name Control Panel
Syntax [STX]CPK:p1[ETX]
Function This command will enable or disable the controls on the
top of the projector.
Parameters Code Description
0 Disabled
1 Enabled
Response [STX]CPK[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]CPK:0[ETX] will disable the Control Panel
Notes Commands can still be used to control the projector.
Sending CPK:0 can disable the buttons
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)