Panasonic RS-232C

Panasonic RS-232 Protocol
for LCD Projector
2525
5.12 Auto Set-up (OAS)
Name Auto Set-up
Syntax [STX]OAS[ETX]
Function This command will perform an Auto Set-up of the
projector.
Parameters None
Response [STX]OAS[ETX]
Interrupt Processing The Projector must be powered on for this command to
be effective.
Examples of Use [STX]OAS[ETX]
Notes If the Auto options are on such as Auto RGB, Auto
Keystone, Auto YPbPr, Auto RGB Input the projector
will adjust itself to the input. If any one of the Auto
options is set to Off, that item will be skipped.
Projector Model to Command Compatibility
Model
Number
PT-L711U
PT-L711XU
PT-L701U
PT-L701XU
PT-L701SDU
PT-L701XSDU
PT-L511U
PT-L511XU
PT-L501U
PT-L501XU
Command
Acceptance
Yes Yes Yes Yes Yes
(Yes if Command can be used, No if command cannot be used)