8 Self diagnosis and special mode setting
This unit is equipped with features of self-diagnostic & special mode setting for checking the functions & reliability.
8.1. Special Mode Table
Below is the various special modes for checking:-
Item FL Display Key Operation
Mode Name Description Front Key
Self -Diagnostic
Mode
To enter into self
diagnostic checking for
main unit.
1. Select [ ] for CD mode (Ensure no
tape or CD inserted).
2. Press and hold [
]button for 2
seconds follow by [
].
To exit, press
button on main unit or
remote control.
Doctor Mode To enter into Doctor
Mode for checking of
various items and
displaying EEPROM and
firmware version.
(For more information,
refer to section 8.1.2)
Note: The micro-
processor version as
shown is an example. It
will be revise when there
is an updates.
1.
2.
The Check Sum of EEPROM and firmware
version will be display for 1 sec.
* ROM correction
** Firmware version No:
In any mode:
1. Press [
] button on main unit follow
by [4] and [7] on remote control.
To exit, press
button on main unit or
remote control.
FL Display Test To check the FL
segments display (All
segments will light up)
In doctor mode:
1. Press [DIMMER] button on remote control.
To exit, press
button on main unit or
remote control.
CD to Tape
Recording Test
Mode
To Inspect the recording
process from CD to
TAPE for the unit.
(For more information,
refer to section 8.1.3)
In doctor mode:
1. Press [4] button on remote control.
To exit, press
button on main unit or
remote control.
Tape Recording
and Playing
To Inspect the Tape
recording and playing is
process for unit.
(For more information,
refer to section 8.1.4)
In doctor mode:
1. Press [5] button on remote control.
To exit, press
button on main unit or
remote control.
Tape Eject test To check on the tape
eject function.
In doctor mode:
1. Press [6] button on remote control.
To exit, press
button on main unit or
remote control.
Volume Setting To Forced Volume
Setting.
1.
2.
3.
In doctor mode:
1. Press [7] button on remote control.
2. Press [8] button on remote control.
3. Press [9] button on remote control.
To exit, press
button on main unit or
remote control.
13
SA-PM33EE
To Next Page
Loading...
