Panasonic SC-PM08

Timer and others
RQT5377
34
B
A
Í
45
TV Í
TV/VIDEO
TV CH
AUTO OFF
SLEEP
œ PLAY
DIMMER
ACTION
MUTING
MIX 2CH
S.SURROUND
RETURN
L
0987
654
321
ENTER
TEST
DISPLAY
CANCEL
PLAY MODE
MARKER
REPEAT TUNER
AUX
TREBLEBASS
SLOW/SEARCH
;
SHIFT
∫ 1
VOLUME
SUBTITLE AUDIO ANGLE
CH SELECT
3
3
3 3
56
MENU
BAND
TOP MENU
rs
rsrs
XW
W
X
Í
45
TV Í
TV/VIDEO
TV CH
AUTO OFF
SLEEP
œ PLAY
DIMMER
ACTION
MUTING
MIX 2CH
S.SURROUND
RETURN
L
0987
654
321
ENTER
TEST
DISPLAY
CANCEL
PLAY MODE
MARKER
REPEAT TUNER
AUX
TREBLEBASS
SLOW/SEARCH
;
SHIFT
∫ 1
VOLUME
SUBTITLE AUDIO ANGLE
CH SELECT
3
3
3 3
56
MENU
BAND
TOP MENU
rs
rsrs
XW
W
X
œPLAY
SHIFT
CLOCK/TIMER
SLEEP
AUTO OFF
SLEEP
SLEEP
Using the timers
»
A
Using the play timer
Turning the timer on and off
The timer comes on at the set time if “F PLAY” is displayed. The
timer can be turned on and off by pressing [SHIFT] i [F PLAY].
Checking the timer
Press [CLOCK/TIMER].
(While the unit is on, press [CLOCK/TIMER] to select “FPLAY”).
The timer conditions are shown in the following order.
Start time>Finish time>Source>Volume
Playing the unit after the timer is set
The unit can be used after the timer is set.
Turn the unit off before the set time.
Note
³If you turn the unit off and on again while the timer is functioning, the
finish time setting will not be activated.
³If the unit is on, the timer will not function. The unit must be in the
standby mode.
³If AUX is selected as the source, when the timer comes on, the
system turns on and engages AUX as the source. If you want to
play a connected unit, set the other unit’s timer to the same time.
(See the other unit’s instruction manual.)
³The timer cannot be used to start program and random play.
»
B
The sleep timer
Remote control only
This timer turns the unit off after a set time.
Press [SLEEP] to select the time
(minutes).
Each time you press the button:
SLEEP 30----------)SLEEP 60----------)SLEEP 90
^------SLEEP OFF(---SLEEP 120(------}
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF”.
To confirm the remaining time
While the timer is functioning
Press [SLEEP].
The remaining time is shown for about 5 seconds.
To change the setting
Press [SLEEP] to display the remaining time, then press again to se-
lect the required time.
Using the timers together
The play and sleep timer can be used together.
The sleep timer always has priority. Be sure not to overlap timer set-
tings.
pm08.p33-48.p65 4/4/00, 9:22 AM34