Camera
54
Sequence display type settings
♦Initial default
1-screen live sequence
♦Initial default
4-screen live sequence
♦Initial default
Item Settings Description
Sequence display type 1-screen♦ / 4-screen Selects 1-screen or 4-screen during sequence display.
Item Settings Description
Cam. Cam.1 to Cam.64 / -- Specifies the camera images displayed for each step.
• Selecting [--] causes the step to be skipped.
Preset position Signal input
(Blank♦)
Specifies the camera preset position (1 to 256).
• When this setting is blank, the camera does not move to a
preset position.
Dwell time 2s♦ / 3s / 5s / 10s / 20s Specifies the amount of time until a switch is made to the next
step in the sequence.
Item Settings Description
Dwell time 2s♦ / 3s / 5s / 10s / 20s Specifies the amount of time until a switch is made to the next
step in the sequence.
To Next Page
Loading...
