Panasonic WJ-NV200K - Camera control panel

46
[Camera setup] tab
Transmit the date & time and text displayed on an image, the refresh rate, and the VMD alarm settings to the camera.
Click the [Setup >] button for each item to open the respective setup window.
Note:
 • Refertothe"Readme.txt"ontheprovidedCD-ROMaboutthesupportedcameras.
 • Itisimpossibletocheckthecurrentsettingsusingthisrecorder.
Interchange camera numbers [Change the display position of camera]
Click the [Setup >] button for "Change the display position of camera" on the [Camera registration] tab to display the following
items.
The registered cameras will be displayed on the screen in the order of 1, 2 ...16 from top left to right. (4 multi-screen segments
when 4 cameras are connected in the system, 16 multi-screen segments when 12 cameras are connected)
To interchange camera numbers, drag the camera image to be moved with the mouse and drop on the desired position.
If the camera titles are to be interchanged as well, mark the "Also change camera titles" checkbox.
[Refresh] button
Obtain the latest camera image after interchanging cameras.
[Back] button
Save the settings and return to the [Camera registration] tab.