• Off: The color mode is selected.
• On(IR Light Off)
/On
, WV-S2131: Always
captured as black & white images.
• On(IR Light On)
(excluding WV-S2131): Always captured as black
& white images. Suitable when using near-infrared lighting at night.
• Auto1(IR Light Off)
(excluding WV-S2131)/Auto1(Normal)
, WV-S2131: The camera automatically switches between the color mode and the black
& white mode in accordance with the picture brightness (luminance).
• Auto2(IR Light On)
(excluding WV-S2131)/Auto2(IR Light)
, WV-S2131: The camera automatically switches between the color mode and the black
& white mode in accordance with the picture brightness (luminance). Suitable when using near-infrared
lighting at night.
• Auto3(SCC): Suitable to keep the color mode even under darker light condition. The Super Chroma
Compensation (SCC) function retains the color mode even with dim lighting.
• Default: Auto2(IR Light On)
(excluding WV-S2131)/
Auto1(Normal)
, WV-S2131
Super Chrome Compensation (SCC) function
This function achieves faithful color images using the proprietary color compensation technology that
reproduce images even under low illumination where it is usually difficult to capture objects faithfully.
Note
• Since the color compensation technology is used for “Auto3(Super Chrome Compensation(SCC))”,
some colors may look different from the actual objects depending on the light condition (such as when
infrared lights are used).
• The operating sound might be heard when changing to black-and-white mode, however it does not
indicate any malfunction.
[Level]
Select the threshold illuminance level (brightness) to switch between the color mode and the black & white
mode. The descriptions about the following threshold illuminance levels are given when “Off” is selected for
“Super Dynamic(SD)”.
• High: Switches from the color mode to the black & white mode when the ambient brightness (illuminance)
of the camera is approx. 2 lx or less.
• Low: Switches from the color mode to the black & white mode when the ambient brightness (illuminance)
of the camera is approx. 1 lx or less.
• Default: High
Note
• When a low value is selected for “Maximum gain”, it may be difficult to switch modes depending on the
environment.
[Dwell time]
Select a wait time for switching between the color mode and the black & white mode from the following.
2s/ 10s/ 30s/ 1min
• Default: 10s
[IR LED light intensity]
(excluding WV-S2131)
Select the IR LED light intensity from High/Middle/Low/Off.
• Default: High
Operating Instructions 101
2 Settings
To Next Page
Loading...
