2. Enter the information of the certificate to be generated.
Item Description Available number of characters
[Common Name] Enter the camera address or host name. 64 characters
[Country] Enter the country name. 2 characters (Country code)
[State] Enter the state name. 128 characters
[Locality] Enter the locality name. 128 characters
[Organization] Enter the organization name. 64 characters
[Organizational
Unit]
Enter the unit name of the organization. 64 characters
[CRT key] Displays the key size and generation time & date
of the current key.
—
3. Click the [OK] button after entering the items.
→ The [Save As] dialog box will be displayed.
4. Enter a file name for the CSR in the [Save As] dialog box to save on the PC.
→ The saved CSR file will be applied to the CA.
IMPORTANT
• The certificate will be issued for the set of the generated CSR and CRT key. If the CRT key is
re-generated or updated after applying to the CA, the issued certificate will be invalidated.
Note
• This camera generates the CSR file in the PEM format.
2.4.4.3 Installation of the certificate issued by CA
IMPORTANT
• If the CSR file is not generated, it is impossible to install the certificate (CA certificate) issued by CA.
• For the installation of the certificate issued by CA, the CA certificate issued by CA is required.
1. Click the [Browse...] button of “CA Certificate - Certificate install”.
→ The [Open] dialog box will be displayed.
2. Select the certification file and click the [Open] button. Then, click the [Execute] button.
→ The certification will be installed.
Note
• The host name registered in the installed certificate will be displayed on “CA Certificate -
Information”. Depending on the status of the certificate, the following are displayed.
Indication
Description
Invalid The CA certificate is not installed.
[Host name of the certificate] The certificate has already been installed and
validated.
Expired The certification has already expired.
80 Operating Instructions
2 Settings
To Next Page
Loading...
