Item Description Available number of characters
[State] Enter the state name. 128 characters
[Locality] Enter the locality name. 128 characters
[Organization] Enter the organization name. 64 characters
[Organizational
Unit]
Enter the unit name of the organization. 64 characters
[CRT key] Displays the key size and generation time & date
of the current key.
—
Note
• To use the CA certificate, follow the requests from the CA about the information to be entered.
• The available characters for [Common Name], [State], [Locality], [Organization], [Organizational
Unit] are 0-9, A-Z, a-z and the following marks.
- . _ , + / ( )
3. Click the [OK] button after entering the items.
→ The [Save As] dialog box will be displayed.
4. Enter a file name for the CSR in the [Save As] dialog box to save on the PC.
→ The saved CSR file will be applied to the CA.
IMPORTANT
• The CA certificate will be issued for the set of the generated CSR and CRT key. If the CRT key is
re-generated or updated after applying to the CA, the issued CA certificate will be invalidated.
Note
• This camera generates the CSR file in the PEM format.
2.9.3.6 Installation of the CA certificate
IMPORTANT
• If the CSR file is not generated, it is impossible to install the CA certificate.
• For the installation of the CA certificate, the CA certificate issued by CA is required.
1. Click the [Browse...] button of “CA Certificate - CA Certificate install”.
→ The [Open] dialog box will be displayed.
2. Select the CA certificate file and click the [Open] button. Then, click the [Execute] button.
→ The CA certificate will be installed.
Note
• The host name registered in the installed CA certificate will be displayed on “CA Certificate -
Information”. Depending on the status of the CA certificate, the following are displayed.
Indication
Description
Invalid The CA certificate is not installed.
[CA certificate Host name] The CA certificate has already been installed and
validated.
184 Operating Instructions
2 Settings
To Next Page
Loading...
