Detailed setting
[Auto contrast adjust]
Select On/Off(Manual) to determine whether or not to activate the auto contrast adjust function.
On: Activates the auto contrast adjust function.
Off: Stops the auto contrast adjust function.
• Default: On
Note
• When “On” is selected for “Intelligent Auto”, this setting is not available.
[Contrast level]
Adjust the contrast level.
If you move the slider in the “+” direction, the contrast of the image will increase.
If you move the slider in the “-” direction, the contrast of the image will decrease.
Click the [Reset] button to reset to the default setting.
• Default: 128
[Adaptive black stretch]
Adjust the brightness of the dark parts of the image.
If you move the slider in the “+” direction, the dark parts of the image will become brighter.
If you move the slider in the “-” direction, the dark parts of the image will become darker.
Click the [Reset] button to reset to the default setting.
• Default: 128
IMPORTANT
• The “adaptive black stretch” settings may cause the noise in the darker parts to increase, and the parts
around borders between the darker parts and the brighter parts may become darker/brighter than the
other darker/brighter parts.
104 Operating Instructions
2 Settings
To Next Page
Loading...
