IMPORTANT
• When a value with an interval longer than “Max.1/30s” (Max.2/30s/ Max.4/30s/ Max.6/30s/ Max.10/30s/
Max.16/30s) is selected for “Maximum shutter” (®page 100), if “Auto focus” is executed during slow
shutter operations at night, it may take a long time to complete “Auto focus”.
• In the following locations or with the following subjects, the focus may not be able to be automatically
adjusted. In this case, manually adjust the focus.
– when the subject moves a lot
– when there are large changes to the lighting intensity
– when the light level is low
– when the subject or location is extremely bright or reflective
– when viewing through windows
– when the dome cover is in a location where it can easily become dirty
– locations where there is not much contrast such as a white wall
– when there is harsh flickering
• When images in the near-infrared light area change from color to black & white, images may be out of
focus due to the nature of optical properties. In this case, the focus can automatically be corrected by
selecting “Auto” or “Preset” for “Adjusting method” (the focus will not automatically be adjusted
according to the illumination level change once the focus is corrected).
[Adjusting method]
Select the focus adjustment method upon switching between the color mode and the black & white mode.
• Auto: Adjusts the focus function automatically and corrects the focus when switching between color and
black & white images.
• Preset: Performs the preset movement to each specified focus position when switching between color and
black & white images. The preset position is the focus position specified last time, which was automatically
memorized for each of color images and black & white images.
• Fix: Fixes the position after adjusting the focus either automatically or manually.
• Default: Auto
[Close] button
Click this button to close the “Zoom/Focus adjustment” setup menu.
Operating Instructions 111
2 Settings
To Next Page
Loading...
