Panasonic WV-S2500 Series - Page 125

IMPORTANT
• When accessing the camera using the HTTPS protocol, install the CA certificate of the camera to
display images on the monitor. (®page 184)
• For further information about “Network Camera Recorder with Viewer Software Lite”, which is suited
to viewing images from several cameras, refer to our website
(http://security.panasonic.com/support/info/).
• This camera is specified when “selfcamera” is displayed for the IP address or host name.
Note
• When using the host name, it is necessary to configure the DNS settings of the PC to be used for the
multi-screen display. Refer to the network administrator for information on the DNS setting of PCs.
[Camera title]
Enter the title of the camera. The entered camera title will be displayed on a multi-screen.
• Available number of characters: 0 - 20 characters
• Unavailable characters: " &
• Default:
– (Cam. 1) The model No. is displayed.
– (Cam. 2 - 16) None (blank)
Note
• When selecting a 16 split-screen, some characters of the camera title to be displayed may not be
displayed.
Initial display
[Layout]
Select the layout for the initial display from the following:
4 Screens(1-4)/ 4 Screens(5-8)/ 4 Screens(9-12)/ 4 Screens(13-16)/ 9 Screens(1-9)/ 9 Screens(10-16)/ 16
Screens
• Default: 4 Screens(1-4)
[Refresh interval]
Select the refresh interval during initial display.
• H.265(1): Displays the camera image in the H.265 format (video).
• H.264(1): Displays the camera image in the H.264 format (video).
• MJPEG: Displays the camera image in the motion JPEG format (video).
• Refresh interval : 1s/ Refresh interval : 3s/ Refresh interval : 5s/ Refresh interval : 10s/ Refresh
interval : 30s/ Refresh interval : 60s: Displays the JPEG format (still image) camera image in the selected
interval.
• Default: MJPEG
[Image capture size(4 Screens)]
Select the image capture size for 4 screens in initial display.
• Default: 320 ´ 180
Operating Instructions 125
2 Settings